Filter By:
Seatposts

$199.99
The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains.
- Cable activated, hydraulic action, infinitely adjustable travel
- Double key-way design prevents lateral twisting
- Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails
- Sealed cartridge internals for quick replacement
- Low profile head-seal and saddle clamp increase useable travel

$186.99 - $249.99
$250.00
Up to 25% Off
The Terra seatpost is the best choice for riding mixed terrain, gravel, or rough roads because it smooths the ride by allowing significant vertical compliance. The secret to this ride smoothing post is in the composite layup that we utilized. By utilizing composites with varying elongation characteristics at specific locations in the post, we enabled vertical compliance for comfort while retaining requisite strength for mixed terrain riding, all at a sub-200 gram weight (27.2 x 330 x 0).
- 18mm Vertical Compliance (20mm offset / Full Extension)
- 194 grams (27.2 x 330mm x 0)
- Advanced composite construction delivers ride-smoothing vertical compliance.
- Available in four sizes: 27.2mm x 330mm x 0 offset, 27.2mm x 380mm x 0 offset, 27.2mm x 330mm x 20mm offset, 27.2mm x 380mm x 20mm offset
- No-Fault crash replacement policy. Lifetime warranty
- Proven clamp design ensures ease of adjustment and slip-free performance.
- System Weight Limit: 275lbs / 125kg

$861.00
Our intention with Reverb AXS was inventive and pure: No hoses. No routing. No energy wasted. Not a single thing in the way of the experience. We created a reliable wireless-electronic dropper post and controller that actuates with drastically less effort and zero distraction. Expanding what's possible on a bike, Reverb AXS is enabled by SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components.
- Effortless Electronic-Wireless actuation and infinite height adjustment with a single touch.
- Clean, simple and fast to install. No hoses to route, no fishing required.
- Updated internals for faster return speed in all conditions.
- New Vent Valve Technology, a simple and reliable built in service solution without disassembly of the seatpost.
- SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components.
- Includes RockShox AXS handlebar controller, rechargeable SRAM battery, and charger.

$199.99 - $203.99
We made this post to honor your most adventurous days on the trail. From the quadzilla climbs to the serpentine descents, the Loam Dropper capitalizes on PNW's best-in-class reliability in our shortest, lightest, and most customizable package yet. The new Loam also features swappable silicone bands that hug the midcap, giving you the opportunity to match your bike (or mood).
UPGRADED TRAVEL PLANS
By shortening the overall post and adding 25mm of Tool-Less Travel Adjust we’ve guaranteed you more drop across a wider variety of frame designs, sizes, and body types. This means more distraction-free descents with less awkward high fives from your saddle when the trail gets rowdy.
UNDER PRESSURE
Slow and controlled or swift and poppy? Dial-in your dropper’s return rate with personalized pressure, courtesy of the Loam Post’s adjustable air cartridge.
MAKE IT YOURS
The Loam Post features a machined channel on the mid-cap that's home to a swappable silicone band. Each post comes with our standard Blackout Black band but we offer our full range of colors to match your bike, PNW cockpit or personal chakra aura.

$68.99 - $73.99
Dropper post levers are something a lot of us overlook—we want our dropper to work but don't think about the button that makes the magic happen. After testing a bunch of levers, from the plastic ones to the ergonomically weird, even the best in class, we decided we could do better. So we made the Loam Lever. It's the most adjustable lever around, ensuring you can modify it to fit your exact ergonomic specifications. The lever's grippy, injection-molded pad has got your back in sloppy weather conditions. And, speaking of weather, we made sure the whole thing was as weatherproof as possible, meaning your lever won't squeak, bind up, or fail after being in the rain.
The Loam Lever Has 5 Key Characteristics:
1. Adjustability - We believe precision matters, this lever provides two forms of adjustment so you can dial-in your perfect placement.
2. Weather Proof - Oversized high-quality sealed bearing paired with an additional seal and all stainless hardware for longevity and durability.
3. No-Slip Grip - Speaking of weather, the Loam Lever features a grippy, injection-molded thumb pad so you can drop or raise at the right time in even the sloppiest of conditions.
4. Techy AF - Custom CNC machining throughout the whole design of the Loam Lever for precision and weight reduction.
5. Direct Mount - Available in SRAM's MatchMaker X for Guide brakes and Shimano's I-Spec II for XTR M9000, XT M8000, SLX M7000, and DEORE M6046

$319.99 - $409.99
3 years of REVIVE out in the market resulted in another benchmark product for BikeYoke: REVIVE 2.0. The new extralong 213mm REVIVE required a lot of re-thinking and re-engineering the whole chassis structure and since we think they deserve it, the shorter REVIVES will also get all the nice updates, and benefit from what was originally implemented only for the longest sibling of the REVIVE family.
Noteworthy updates of the REVIVE 2.0 include:
- One piece 3D-forged upper tube unit for improved stiffness and strength
- Fully hard-anodized pin seats in the upper tube for improved corrosion-resistance
- CNC-finished actuation lever for even smoother engagement
- New upper saddle clamp and saddle bolts with integrated conical washers for even simpler saddle installation
Wanna know more about the REVIVE? What if there was a dropper post, that actually solves and not just improves reliability issues, saves cost and time on the long run, and does not let you worry about too much time spent at service-centers? Or how about “bleeding” your seat post within a few seconds, while it is still installed in your bike?
BikeYoke presents the REVIVE dropper post, featuring one of the most brilliant design features in dropper post design in many years. More than 10 years of experience in drop-post design went into the “REVIVE” and the development has finally paid off.
Of, course, just as many other companies, BikeYoke would say, that REVIVE is reliable and strong and smooth. And yes, REVIVE is all of that, but not because we tried to improve current designs, but because we were thinking outside of the box and created a new concept, that is completely different from everything before.
To understand the benefits over other posts you have to know about the problems of many current designs first. Many of the popular current seatpost designs are based on a hydraulic lockout-system that relies on a perfectly sealing IFP (Internal Floating Piston), separating oil from air to prevent the seatpost from getting sagging or bouncing. There are a lot of difficulties to overcome when using an IFP because an IFP has to maintain 100% sealing function. If air could go to the oil side, your post will start becoming springy. This happens to a lot of posts in the market already and is the main issue why posts need to be serviced.
That´s why BikeYoke´s “REVIVE” features a NON-IFP design, because we think it is too difficult - if not impossible - to make a really reliable design using an IFP. REVIVE only requires 2 dynamic seals in the hydraulic circuit: The shaft sealing and the main piston sealing for the lockout mechanism. The highly critical IFP has been removed, and with it the need of perfect concentricity and finish of the sealing surfaces of the tubes. The lack of an IFP also results in the smoothest action you can think of.
The most important and ground-breaking feature of Revive is its “REVIVE-VALVE”. Even REVIVE can get air somewhere where it does not belong. This can happen for example when you actuate your seatpost while its upside down. And here is where the patented RESET VALVE comes into play:
- Insert a 4mm Hex Key into the REVIVE hex port, turn it and push down the post by hand.
- This will reset your hydraulic circuit on the fly - whenever. wherever. This is done just within a few seconds and only by the turn of a 4mm Allen key or the integreated mini reset lever, that comes with the post - of course without even having to remove your drop post from your bike.
So, now one might already understand that:
- No external air will want go inside the post´s hydraulic circuit, since it is charged with higher pressure, than its surroundings.
- No oil will go out (or at least very very little oil over the curse of a long time), because of very stable sealing - external sealing has never been a real problem of current post design
- The hydraulic system can be reset to “new” via the unique “REVIVE-valving”
- This means the hydraulic circuit is a very stable closed system and basically maintenance free.
Still there are parts that will need to be serviced sooner or later and when designing REVIVE it was put a lot of attention to maximum user-friendly serviceability:
- Bushings and keyway pins will wear over time. Usually, the pins wear first and you would want to replace them to reset your rotational play.
- Exchanging the pins and the lower bushing is simple and does not require any opening of the hydraulic system and can be done within less than 5 minutes.
1 set REVIVE dropper post includes:
- 1x REVIVE Seatpost
- 1x cable housing 1500mm
- 1x inner wire 1700mm
- 2x housing endcap
- 1x barrel cable clamp
- 1x air valve adapter
- 1x Quick-Reset-Lever
- 1x remote (optional)
- 1x BikeYoke I-spec adapter or Splits Clamp (optional)
- 1 set titanium saddle bolts and nuts (optional)

$349.99 - $439.99
Our award-winning REVIVE is also available as an oversized version for 34.9mm seattubes. Not only the lower tube diameter increased to 34.9, but also the stanchion tube grew form 25mm to 28mm. Finally there is a dropper that gives a stunning look in beefy seattubes while gaining strenght and stiffness at the same time. This is unrivaled by the competition. Optimized wall thickness and materials keep the weight extremely low and so our REVIVE MAX weighs in lower than some "regular" sized posts of the competition.
Let´s see, what´s special about our REVIVE posts:
What if there was a dropper post, that actually solves and not just improves reliability issues, saves cost and time on the long run, and does not let you worry about too much time spent at service-centers?
Or how about “bleeding” your seat post within a few seconds, while it is still installed in your bike?
BikeYoke presents the REVIVE dropper post, featuring one of the most brilliant design features in dropper post design in many years. More than 10 years of experience in drop-post design went into the “REVIVE” and the development has finally paid off.
Of, course, just as many other companies, BikeYoke would say, that REVIVE is reliable and strong and smooth, …
And yes, REVIVE is all of that, but not because we tried to improve current designs, but because we were thinking outside of the box and created a new concept, that is completely different from everything before.
To understand the benefits over other posts you have to know about the problems of many current designs first: Many of the popular current seatpost designs are based on a hydraulic lockout-system that relies on a perfectly sealing IFP (Internal Floating Piston), separating oil from air to prevent the seatpost from getting sagging or bouncing. There are a lot of difficulties to overcome when using an IFP because an IFP has to maintain 100% sealing function. If air could go to the oil side, your post will start becoming springy. This happens to a lot of posts in the market already and is the main issue why posts need to be serviced.
That´s why BikeYoke´s “REVIVE” features a NON-IFP design, because we think it is too difficult - if not impossible - to make a really reliable design using an IFP. REVIVE only requires 2 dynamic seals in the hydraulic circuit: The shaft sealing and the main piston sealing for the lockout mechanism. The highly critical IFP has been removed, and with it the need of perfect concentricity and finish of the sealing surfaces of the tubes. The lack of an IFP also results in the smoothest action you can think of.
The most important and ground-breaking feature of Revive is its “REVIVE-VALVE”.
Even REVIVE can get air somewhere where it does not belong. This can happen for example when you actuate your seatpost while its upside down.
And here is where the patented RESET VALVE comes into play:
- Insert a 4mm Hex Key into the REVIVE hex port, turn it and push down the post by hand.
- This will reset your hydraulic circuit on the fly - whenever. wherever. This is done just within a few seconds and only by the turn of a 4mm Allen key or the integreated mini reset lever, that comes with the post - of course without even having to remove your drop post from your bike.
So, now one might already understand that:
- No external air will want go inside the post´s hydraulic circuit, since it is charged with higher pressure, than its surroundings.
- No oil will go out (or at least very very little oil over the curse of a long time), because of very stable sealing - external sealing has never been a real problem of current post design
- The hydraulic system can be reset to “new” via the unique “REVIVE-valving”
- This means the hydraulic circuit is a very stable closed system and basically maintenance free.
Still there are parts that will need to be serviced sooner or later and when designing REVIVE it was put a lot of attention to maximum user-friendly serviceability:
- Bushings and keyway pins will wear over time. Usually, the pins wear first and you would want to replace them to reset your rotational play.
- Exchanging the pins and the lower bushing is simple and does not require any opening of the hydraulic system and can be done within less than 5 minutes.
1 set REVIVE dropper post includes:
- 1x REVIVE Seatpost
- 1x cable housing 1500mm
- 1x inner wire 1700mm
- 2x housing endcap
- 1x barrel cable clamp
- 1x air valve adapter
- 1x Quick-Reset-Lever
- 1x remote (optional)
- 1x BikeYoke I-spec adapter or Splits Clamp (optional)
- 1 set titanium saddle bolts and nuts (optional)

$225.00
This is the first seatpost that’s compliant AND aerodynamic—a total win, win. We initially developed the Pavé seatpost for the all-new Roubaix, and it’ll make a fantastic addition to your Tarmac SL6. Of course, it’s also designed to make fine-tuning your saddle position a breeze with a single-bolt adjustable head and two setback options.
- FACT carbon construction paired with a D-shaped seatpost that's compatible with the 2020 Roubaix and Taramc SL6.
- Engineered to have the saddle move in a perfect arc, aka a back & downward motion.
- Setback: 20mm/0mm
- Cylindrical aluminum head assembly adjusts fore/aft and tilt with a single bolt.
- Length: 380mm/450mm
- Approximate Weight: 209g

$186.99
$250.00
25% Off
This replacement seatpost for the Tarmac SL7 ensures the perfect fit with two different setback options—0mm and 20mm.
- Cylindrical aluminum head assembly adjusts fore-aft and tilt with an easy-access single bolt.
- FACT carbon construction and aerodynamic profile compatible with the 2021 Tarmac SL7.
- Setback: 0/20mm.
- Sleek Di2 integration hides the Di2 junction box inside.
Page 1 of 1