Tools & Tuning

For professional waxers! Our best profile used by serious ski waxers in World Cup. Lightweight aluminum profile. Front and back part are both adjustable. Can be used both ways without turning the profile. New movable fixing mechanism. Takes skis without bindings. Practical in small waxing rooms. Fits to T0079-1 legs or T0790-K clamps. Takes skis from 150 cm to 210 cm. Weight: 4.5 kg/10 lbs. Length of main stem: 1,61 meters.

HS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. HS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS6 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 155°C (311°F). Highlights: - Fantastic allround glider - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Exists also in liquid - Well tested on many conditions

TS10B - Top Speed 10 black. Great dirt resistance! The TSB series are gliders for competition that works extremely well on dirty snow and when dry friction conditions. TS10B is made harder than the std. TS10, as the adjusted hardness makes the wax more durable and absorbs less dirt. The solid lubricant additive reduces the friction in contaminated snow. Excellent results in artificial snow as well as natural transformed older snow, especially noticeable when used alone. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. TS10B can be used as race wax alone, but is often used as a base for top coats. Recommended iron temp: 165°C (329°F). Replaces the HF10BWX

TS6B - Top Speed 6 Black. An undisputed favorite in cold conditions! The TSB series are gliders for competition that works extremely well on dirty snow and when dry friction conditions. The TS6B is the second hardest wax in the TSB line, and is a great choice in typical winter conditions, both for alpine and cross country. It is loved by servicemen, due to its great durability and properties when the snow is dirty. This is achieved thanks to the black solid lubricant additive that also reduces friction when very cold snow. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. TS6B can be used as a race wax alone or as a base for top coats. Recommended iron temp.: 155°C (311°F).

TS7B - Top Speed 7 Black. A great racing wax for typical winter conditions! The TSB series are gliders for competition that works extremely well on dirty snow and when dry friction conditions. TS7B is a versatile wax suited for normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. The solid lubricant additive reduces the friction in cold conditions and in contaminated snow. It’s a very popular wax both in alpine and cross country and has shown good properties on artificial snow in addition to natural, transformed older snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. TS7B can be used as race wax alone but is often used as base for top coats. Recommended iron temp: 150°C (302°F).

TS8 - Top Speed 8 red. Great dirt resistance! The TSB series are gliders for competition that works extremely well on dirty snow and when dry friction conditions. TS8B is made harder than the std TS8. The adjusted hardness makes the wax more durable and absorbs less dirt. The solid lubricant additive reduces the friction in contaminated snow. Excellent results in artificial snow as well as natural transformed older snow, especially noticeable when used alone. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. TS8B can be used as race wax alone but is often used as a base for top coats. Recommended iron temp: 150°C (302°F).

HS7 performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. Can be used as a racing wax at low air humidity, but will also serve the purpose as a brilliant training wax. The speed of the iron should be approx. 8-10 sec. on a skating ski or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS7 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (302°F). Highlights: - Fantastic allround-glider - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Well tested on many conditions

A great wax for both base-prep and training. It can also be used as a race wax, preferably used with a top coat. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 150°C (302°F). Replaces the LF8X. Highlights: - Easy to work with - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Well tested on many conditions

Quality, easy to adjust waxing profile. Same profile in front and back. Lightweight aluminium. Front and back part are both adjustable. Fixation in binding. Takes both classic and skating skis from 140 cm to 210 cm. Fits to T0079-1 legs or T0790-K clamps. Weight: 3 kg/6.6 lbs. Length of main stem approx. 1,61 meters.

Professional fixation device made of aluminum for securing cross-country skis. The large profiles offer a large support area and thus enable professional preparation of skis. With optionally available clamp screws (not supplied) the profile can be mounted to any workbench or used without a workbench with the appropriate legs available as accessories.

For optimal base cleaning prior to waxing. Rotation rate max. 800 rpm. Use the single axle with cover.

Gentle cleaning fluid for cross-country ski skins and touring skins. It removes all types of dirt and residue from the skins.

Powerful digital waxing device for professional use. - The ergonomic design enables waxing in all directions. - Infinite temperature adjustment from 100 °C to 160 °C/ the inbuilt microprocessor controls temperature fluctuations. - The extra-strong aluminum pressure cast plate for ideal heat storage has a curved rhomboid structure that improves the distribution of the wax and compression.

Good wax iron for alpine and cross country skis. 110 Volt, 500 Watt. The 8 mm thick plate gives a stable temperature. T73 has manual choice of temperature by indication of degrees and is simply done by an adjustmentwheel. Adjustment range from 100°C to 165°C. Also available for 220 Volt (product # T73220).

Good wax iron for alpine and cross country skis. 110 Volt, 500 Watt. The 8 mm thick plate gives a stable temperature. T73 has manual choice of temperature by indication of degrees and is simply done by an adjustment wheel. Adjustment range from 100°C to 165°C. Also available for 220 Volt (product # T73220).

Hard high performance racing wax to meet the highest demands. The wax used by World Cup stars! Features: - For cold and aggressive snow conditions - Perfect sliding properties - Maximum water and dirt repulsion - Unmatched degree of hold - Best bonding agent for Top Finish products - Resealable wax case

Medium-hard high performance racing wax to meet the highest demands. The wax used by World Cup stars! Features: - Wide range of use in medium snow temperature conditions - Perfect sliding properties - Maximum water and dirt repulsion - Unmatched degree of hold - Best bonding agent for Top Finish products - Resealable wax case

Soft high performance racing wax to meet the highest demands. The wax used by World Cup stars! features: - For high-moisture and wet snow conditions - Perfect sliding properties - Maximum water and dirt repulsion - Unmatched degree of hold - Best bonding agent for Top Finish products - Resealable wax case

PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). - Recommended iron temp: 130°C (266°F). - Replaces the CH8X. - -4°C to +4°C (25°F to 39°F).

Simple/ very compact fixation device for cross-country skis (skating and classic). Secures with adjustable centre part directly on the binding. Compatible with all current binding models. Ideal for travelling.

The PS5 is the hardest wax in the line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It's a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old, or manmade snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. PS5 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (311°F) - Recommended iron temp: 150°C (311°F). - Replaces the CH5X. - -10°C to -18°C (14°F to 0°F).

PS10 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 120°C (248°F). - A versatile wax for warm conditions - Low melting point and easy to apply

A high quality structure tool for cross country skis that will help you improve the glide in both skating and classic skiing. A 1mm linear structure roll is included. An arrow shows the correct direction of movement. The structure imprint will disappear after rewaxing with an iron. In cold conditions and new snow, we recommend applying the tool to the base with a light pressure. In warmer conditions and transformed snow, apply more pressure. - Structure tool for ski - Ski prepping - Improves glide abilities on skis

Lightweight and tailor-made for SWIX tables! Cross Country profile in plastic, To use with our wax tables, For all skiers, Lightweight and stable. Thermo plastic profile for cross country skis. Fits into waxing tables T0076, T0076-2, T00754, T0075W. Same profile both in the front and back. Includes holder for fixing the binding. Suitable for both classic and skating skis in lengths from 170-210 cm. Lightweight and very stable to work with. Weight: 1.4 kg/3.2 lbs.

Foldable legs for cross country profile. - 1 pair

HS10 is a great base prep wax, but also a great training wax. Ideal in warm conditions, typically during spring skiing. For racing, we recommend going with a top coat as the final layer. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 150°C (302°F). Details: - A popular wax in nordic disciplines - Good water repellent properties - Replaces LF10X - For training and competition Highlights: - For warm conditions - Easy to work with - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Well tested on many conditions

Handle for Roto brushes with hexagonal drive shaft and protective cover. Fits 100 mm wide Swix Roto brushes.

Extra-fine replacement diamond disc for EVO edge grinder. - Grindstone - For EVO edge grinder - For enthusiasts and professional waxers - Gives fantastic results

Fluor Free Hydrocarbon wax 0°C to +10°C. Soft wax for wet snow. Good for first base prep of new skis. - A versatile wax for warm conditions - Ideal for base prep and training use Temperature range from 0°C to 10°C (32°F to 50°F). Recommended iron temp.: 120°C (248°F). CH10X is made slightly harder than the old CH10. Test results show that a harder wax performs better in very wet saturated snow. The adjusted hardness makes CH10X more durable than before. A good wax for base prep and training. For racing, we recommend to go with fluoro wax in this temperature area. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.

Digital Snow Thermometer with short probe (75 mm), accuracy ±0.8°C, water-proof, measures per second, ON-/OFF switch, reversible °C/°F, in plastic case, with clip, battery enclosed. Made for: Base Preparation