Tools & Tuning

Top layer kick wax with high fluoro content. Better glide and easier skiing. Reduces risk for icing. Excellent when high humidity. To be used as top layer.

A liquid topping designed for racing use. Specifically designed for cold conditions, down to -12°C. TS06L is a versatile wax that works well in all snow conditions, but is at its best when humidity is high. Hold the bottle 10-15 cm above the ski base and spray on a thin layer. To even out the product and remove excess liquid, we recommend brushing with a felt cork (T0021) immediately after application. Then allow the product to dry and polish with a nylon brush. For better wear resistance, we recommend rubbing in the product using Roto fleece (T0018F-2) after it has dried and then polish it with a nylon brush. - Liquid yet durable - Excellent as a topping base - Gives excellent glide in cold conditions - Swix’s TS-series liquid glide wax was recommended during the 2021 World Ski Championships

TS10B is harder than the other T10’ products of the PRO system. The extra hardness makes the wax more robust and so absorbs less dirt. The black additive reduces friction in polluted snow. This is particularly noticeable when the wax is used alone. The wax has very good test results on artificial snow and snow transformed into old natural snow. The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. It is important to have a good waxing iron in order to melt the wax efficiently. TS10B can be used as a racing wax alone, but is also often used as a base wax for other racing products. Recommended waxing iron temperature 165°C. - Liquid yet durable - Excellent as a topping base - Ensures a smooth glide in warm conditions - Swix’s TS-series liquid glide wax was recommended during the 2021 World Ski Championships

TS7B - Top Speed 7 Black. A great racing wax for typical winter conditions! The TSB series are gliders for competition that works extremely well on dirty snow and when dry friction conditions. TS7B is a versatile wax suited for normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. The solid lubricant additive reduces the friction in cold conditions and in contaminated snow. It’s a very popular wax both in alpine and cross country and has shown good properties on artificial snow in addition to natural, transformed older snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. TS7B can be used as race wax alone but is often used as base for top coats. Recommended iron temp: 150°C (302°F).

Designed specifically for wet conditions and dirty snow. The black additive helps reduce friction and reduces the amount of dirt that sticks to the base. As well as being superb in wet conditions, this wax is also highly competitive in colder weather. The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. Scrape after waiting about one minute. It is important to have a good waxing iron in order to melt the wax efficiently. Recommended waxing iron temp.: 155°C. - Durable glide wax - A favorite for classic long-distance skiing - Hard wax - Can be used with roto wool - For all skiing - Ski wax

A high quality structure tool for cross country skis that will help you improve the glide in both skating and classic skiing. A 1mm linear structure roll is included. An arrow shows the correct direction of movement. The structure imprint will disappear after rewaxing with an iron. In cold conditions and new snow, we recommend applying the tool to the base with a light pressure. In warmer conditions and transformed snow, apply more pressure. - Structure tool for ski - Ski prepping - Improves glide abilities on skis

For use in hard wax conditions when classic skiing. Practical packaging: the wax can be twisted out like a deodorant stick enabling the waxer a good grip on the wax and the ability to use all of the product. - Yellow for snow temperatures 0C- -2C (32F-28F) - Red for snow temperatures -2C- -10C (28F-14F) - Blue for snow temperatures -7C- 30C (19F- -22F) - XCold for snow tempertures -12C- -30C (10F- -22F) - Base Green is a binder and makes what you put on it last longer. It can also be very good by itself in some conditions.

For optimal base cleaning prior to waxing. To be used as the first brush after scraping of paraffin. Approx rotation rate: 1500-1800rpm.

The easiest way to achieve great glide in warm and wet conditions. Recommended at temperatures from +2°C to +10 degrees. - Durable glide wax for 0°C and warmer conditions. - Excellent as both a topping and as a base wax - Ensures a smooth glide in warm conditions - This glide wax was recommended during the 2021 World Ski Championships

File cleaning brush. - File brush - For cleaning files - For all maintenance of steel edges - Convenient format

For professional waxers! Our best profile used by serious ski waxers in World Cup. Lightweight aluminum profile. Front and back part are both adjustable. Can be used both ways without turning the profile. New movable fixing mechanism. Takes skis without bindings. Practical in small waxing rooms. Fits to T0079-1 legs or T0790-K clamps. Takes skis from 150 cm to 210 cm. Weight: 4.5 kg/10 lbs. Length of main stem: 1,61 meters.

Practical plastic tool for removing wax residue in grooves on edges and sidewalls. With Klister edge.

Soft high performance racing wax to meet the highest demands. The wax used by World Cup stars! features: - For high-moisture and wet snow conditions - Perfect sliding properties - Maximum water and dirt repulsion - Unmatched degree of hold - Best bonding agent for Top Finish products - Resealable wax case

Insulated drink belt with additional pocket for carrying wax or keys. Washable.

Hard high performance racing wax to meet the highest demands. The wax used by World Cup stars! Features: - For cold and aggressive snow conditions - Perfect sliding properties - Maximum water and dirt repulsion - Unmatched degree of hold - Best bonding agent for Top Finish products - Resealable wax case

- Backshop apron - 100% cotton - One size fits all - With phone pocket

Handy size thermometer to measure snow temperature. - Solid plastic protective case - Scaled from -30 to +50 Celsius degrees - Perfect when travelling

For moist, newer snow around 0 degrees, or older snow right below zero. Fluoro free, dark purple kick wax for moist, new snow around zero, and for old, transformed snow just below the freezing point. - Fluoro free kickwax - Good water-repellent qualities - For racing - For new and new fallen fine-grained snow from 1°C to -2°C (34°F to 28°F). - Old/partly transformed snow from 0°C to -5°C (32°F to 23°F). Dark purple kick wax designed for moist, and new or new fallen snow around zero. Can also be used on older snow just below the freezing point without sacrificing glide. The wax contains a new additive designed to impart maximum lubricity. This improves the stick-slip properties of the wax and gives an excellent feeling. Apply each layer thin – then smoothen the surface with a synthetic cork (T12). The VP-line is primarily designed for racers and ambitious non-racing individuals but can also be used by recreational skiers who want the optimum skiing experience.

Digital Snow Thermometer with short probe (75 mm), accuracy ±0.8°C, water-proof, measures per second, ON-/OFF switch, reversible °C/°F, in plastic case, with clip, battery enclosed. Made for: Base Preparation

Good wax iron for alpine and cross country skis. 110 Volt, 500 Watt. The 8 mm thick plate gives a stable temperature. T73 has manual choice of temperature by indication of degrees and is simply done by an adjustment wheel. Adjustment range from 100°C to 165°C. Also available for 220 Volt (product # T73220).

Used for klister application or to remove wax or klister from the base before cleaning with Base Cleaner.

- Performance Hot Wax for racing and training/ fluorine free - Yellow for wet conditions (Snow temp 32f to 21f) - Red for medium conditions (Snow temp 25f to 10f) - Blue for cold conditions (Snow temp 14f to -22f)

HS10 is a great base prep wax, but also a great training wax. Ideal in warm conditions, typically during spring skiing. For racing, we recommend going with a top coat as the final layer. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 150°C (302°F). Details: - A popular wax in nordic disciplines - Good water repellent properties - Replaces LF10X - For training and competition Highlights: - For warm conditions - Easy to work with - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Well tested on many conditions

Practical groove scraper. Handy format. Practical groove scraper for wax removal.

Steel brush. Ø 0.18 mm. Used as first brush on wax after scraping. 5-6 strokes. High quality steel brush that has had an excellent reception in racing.

High-quality adhesive tape that can stand up to low temperatures.

Fluor Free Hydrocarbon wax -4°C to +4°C. Good training wax. Easy to warm in. Good in dry conditions. - A soft wax covering both sides of the freezing point - Great for base prep and training use Temperature range from -4°C to 4°C (25°F to 39°F). Recommended iron temp: 130°C (266°F). A continuation of the std. CH8. An economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.

Skin Cleaner. Gentle cleaning fluid for cross-country skin skis and touring skins. It removes all types of dirt and residues from the skins.

Superb in changing conditions! Klister for competition and training. - Racing klister - Temperature range -7°C to +1°C - For competitive athletes - Superior klister in changing conditions KN33 Nero klister can handle changing snow conditions very well and it has great anti-icing properties. Temperature range +1°C to -7°C (34°F to 19°F). SWIX Nero are revolutionary klisters with a black ingredient that has shown impressive performance. They collect significantly less dirt from the snow than traditionally klisters. They are durable and stay better within the kick-zone than other klisters. NERO provides a secure kick over a longer time than traditional klisters, due to their special characteristics.

Perfect kickwax for moist, new snow, and shiny tracks. Fluoro free, purple-red kick wax that works well in moist new snow and shiny tracks. - Good water-repellent qualities. - Recommend to apply cold. - Fluoro free kickwax. - For racing - For new and new fallen fine-grained snow from 2°C to -1°C (36°F to 30°F). - Old/partly transformed snow from -1°C to -4°C (34°F to 25°F). Purple-red kick wax works very well in moist new snow and shiny tracks. Will also work on older, slightly transformed snow some degrees below the freezing point. If tricky conditions around zero VP65 is recommended. The wax contains a new additive designed to impart maximum lubricity. This improves the stick-slip properties of the wax and gives an excellent feeling. Apply each layer thin – then smoothen the surface with a synthetic cork (T12). Applying the wax when it is cold will ease the application process. The VP-line is primarily designed for racers and ambitious non-racing individuals but can also be used by recreational skiers who want the optimum skiing experience.